Construction tower tours

Tower tours are widely used in construction and repair work and also for installation of outdoor advertising and the provision of cleaning services. They allow working at height much higher than human growth. Broad use of the tower tour is in the premises with high ceilings: sports halls, shopping centers, airports and railway stations, markets and malls.

The tower tour is a spatial design block of flat stair–sections, having three steps.

The design of the tower-the tour is equipped with four wheels and screw jacks for moving the towers, equipped with brakes for fixing the tower at the place of work. Screw supports to compensate for unevenness of the supporting surface.

The tower tour consists of a base kit and section capacity (set floor).

Basic kit consists of:
base Assembly with wheels and galvanized screw – bearings 2pcs.
- diagonal bulk – 1pc.
- stairs-fences – 2pcs.
- dumbbell-fencing – 2pcs.
- rail – 2pcs.
- beam – 8pcs.
- frame-plywood deck with hatch – 1 PC.
- frame-plywood deck without hatch - * (depending on the type of tower-tour)

Section capacity (set floor) consists of:
- stairs-section – 2pcs.
- dumbbells – 2pcs.
- beam – 8pcs.

Additionally for stability install the struts(stabilizers) – 4pcs. For rigidity the diagonal surround fitted every 3 sections.

The bearing elements are made of pipes according to GOST 10704-91, GOST 8645-68, steel grade Stsps 380-20005 GOST (DSTU 2651:2005)